Home › Resources › Interview Guides › Hardware & Networking Interview Q&A PDF
Interview Preparation

Hardware & Networking Interview Questions and Answers PDF

Complete collection • 180+ Questions & Answers

Basic Questions & Answers
Questions 1 - 60 | 60 questions

1What is Windows Server?
Windows Server is an operating system developed by Microsoft that is designed to manage and support servers, networks, users, and applications in a business environment.
2What are the different versions of Windows Server you know?
Windows Server 2000, 2003, 2008 / 2008 R2, 2012 / 2012 R2, 2016, 2019, 2022, 2025.
3What is a Workgroup?
A workgroup is a small, peer-to-peer network where each computer is managed individually. There is no centralized control like in a domain.
4Difference between Domain and Workgroup?
Domain: Centralized control, better security, large networks and single login. Workgroup: Decentralized, basic security, small networks, separate logins.
5What is Active Directory?
Active Directory (AD) is a service in Windows Server that stores information about users, computers, and resources. It helps manage and control access in a network.
6What is a Domain Controller (DC)?
A Domain Controller is a server that stores the Active Directory database and handles logins, authentication, and security in the domain.
7What is an Additional Domain Controller (ADC)?
An ADC is another domain controller that has a copy of the AD database. It helps in load balancing and provides login services if the DC is down.
8What is a RODC (Read-Only Domain Controller)?
A special type of domain controller that only reads data and cannot make changes. Used in branch offices for better security.
9What is the difference between ADC and RODC?
ADC: Full copy, can read and write changes. RODC: Read-only copy, cannot make changes.
10What is a Child Domain?
A Child Domain is a domain that is part of a parent domain. It forms a hierarchy and can be used to organize departments or regions, such as sales.abc.com under abc.com.

Complete Interview Q&A

180+ Hardware & Networking Interview Questions and Answers PDF

Download PDF
11What is the difference between Forest and Tree in AD?
Tree: A group of domains that share a common namespace (such as abc.com and sales.abc.com). Forest: A group of trees that trust each other but may have different names (such as abc.com and xyz.com).
12What is a Trust Relationship in AD?
It allows users from one domain to access resources in another domain. Trusts can be one-way or two-way.
13What is an Organizational Unit (OU)?
An OU is a container in Active Directory used to organize users, groups & computers. It helps apply group policies and manage objects more easily.
14What is a Group Policy Object (GPO)?
A GPO is a collection of settings (rules) that control user and computer behavior. These are applied to OUs, domains, or sites in Active Directory.
15What is Group Policy used for?
Group Policy is used to enforce security settings, control desktop environments, install software automatically, and manage user restrictions.
16What is FSMO? Name the FSMO roles.
FSMO (Flexible Single Master Operations) is a set of special roles in AD where only one domain controller handles certain tasks. Roles: Schema Master, Domain Naming Master, RID Master, PDC Emulator, Infrastructure Master.
17What is the SYSVOL folder?
SYSVOL is a shared folder on domain controllers that stores scripts, group policies, and logon files used by the network.
18What is the purpose of a Global Catalog Server?
A Global Catalog Server stores a full copy of its own domain data and a partial copy of other domains. It helps users search for information across all domains in a forest and log in faster.
19What is Active Directory Replication?
It is the process of copying and updating data between domain controllers, so all of them have the same information about users, groups, and settings.
20Active Directory Partitions:
The Schema, Configuration, Domain, and Application partitions hold AD data. Schema Partition: Stores rules and object types, like what a "user" or "computer" means. Configuration Partition: Stores settings about the whole AD network, like site and service info. Domain Partition: Stores all users, groups, and computers for that specific domain. Application Partition: Stores special data used by applications (like DNS records).
21Domain and Forest Functional Level:
Domain Functional Level: Controls features within one domain. Forest Functional Level: Controls features across all domains in the forest.
22What is DNS and its role in Windows Server?
DNS (Domain Name System) converts domain names (such as google.com) into IP addresses. In Windows Server, it's used to locate domain controllers and other services.
23What is DHCP and its purpose?
DHCP (Dynamic Host Configuration Protocol) automatically assigns IP addresses and network settings (like gateway, DNS) to devices. It reduces manual configuration and simplifies network management.
24What is the difference between DNS and DHCP?
DNS: Resolves names to IP addresses. DHCP: Assigns IP addresses automatically to devices in the network
25What is the difference between Static IP and Dynamic IP?
Static IP: Manually set and does not change. Dynamic IP: Automatically assigned by DHCP and may change over time.
26What is ARP?
ARP (Address Resolution Protocol) is used to map an IP address to a MAC address in a local network. When a device knows the IP but not the MAC, ARP helps find the physical address for communication.
27What is RTP?
RTP (Real-time Transport Protocol) adds sequence numbers and timestamps to audio/video packets (usually carried over UDP), so the receiver can detect lost packets, reorder out-of-sequence packets and play them back smoothly. It does not guarantee delivery.
28What is Wi-Fi and its advantages?
Wi-Fi is a wireless networking technology that allows devices to connect to the internet. Advantages: Mobility (no cables) Easy installation Cost-effective Supports multiple devices
29While system booting, what is the default source and destination IP address?
During system boot (before getting an IP from DHCP): Source IP Address: 0.0.0.0 Destination IP Address: 255.255.255.255
30In a network frame, what are the source MAC and destination MAC addresses?
Source MAC Address: MAC address of the sending device (e.g., 00:1A:2B:3C:4D:5E) Destination MAC Address: MAC address of the receiving device
31DHCP/DNS/RDP/HTTP/HTTPS Port Numbers:
DHCP - 67 (server) and 68 (client) DNS - 53 RDP - 3389 HTTP - 80 (not secure) HTTPS - 443 (encrypted and secure)
32What is DHCP DORA Process?
DORA stands for: D: Discover O: Offer R: Request A: Acknowledgement
33Secondary vs Stub Zone in DNS:
A Secondary zone holds a full copy of records; a stub zone only has information to find authoritative DNS, enabling faster resolution. Secondary Zone: Has a full copy of all DNS records from another DNS server. It helps with backup and load sharing. Stub Zone: Has only important info (like name server records) needed to find the main DNS server. It’s faster because it stores just enough to help with name resolution.
34What is NTFS and its features?
NTFS (New Technology File System) is the main file system in Windows. Features: Security permissions Encryption Compression Support for large files
35What is Disk Quota?
Disk Quota is used to limit how much space a user can use on a drive, helping prevent one user from using all the space.
36What are the dynamic volumes?
Simple Volume Spanned Volume Striped Volume ( RAID 0 ) – fast, no fault tolerance. Mirrored Volume ( RAID 1) - safe, moderate speed RAID 5 Volume: Striping with parity – balance of speed and safety
37What is Virtualization and why is it used?
Virtualization means running multiple virtual computers on one physical machine. It saves money, improves performance, and helps in testing and backups.
38What is Hyper-V and its use?
Hyper-V is Microsoft’s virtualization tool. It lets you create and run virtual machines on a single physical computer.
39What is PowerShell?
PowerShell is a command-line tool and scripting language used to automate tasks and manage Windows systems
40What is the difference between Command Prompt and PowerShell?
Command Prompt: Basic commands PowerShell: Advanced scripting and works with system and network configurations
YOUR CAREER STARTS HEREReady to Start Your IT Career?Get practical training, develop job-ready skills, and take your first step toward a successful IT career with SYSTECH.
Enroll Today
41What is Windows Server Core?
Server Core is a light version of Windows Server with no GUI. It uses less space and is more secure, but you manage it using commands or remote tools.
42Difference between Server Core and Desktop Experience?
Server Core Desktop Experience GUI No Yes Performance Better Slower Management Command-line only Full graphical interface
43Install vs Boot Image:
Install image has the OS editions; boot image has the setup files to start installation. Install Image: It contains the Windows versions (such as Server 2016, 2019) that you can install. Boot Image: It has the files needed to start the computer and begin the installation process.
44How do you secure a Windows Server?
Apply Windows updates regularly Use Windows Defender Antivirus Enable the firewall Use strong passwords Disable unused services and ports Limit user permissions Monitor using Event Viewer
45Upgrade vs Migration:
Upgrade keeps settings/data; migration moves roles/data to a new server. Upgrade: You install a newer version of Windows Server on the same machine, and it keeps all your settings and data. Migration: You move everything (roles, settings, data) from the old server to a new one.
46What is a Firewall and how is it managed in Windows?
A firewall is a security tool that blocks or allows network traffic based on rules. In Windows, you can manage it using: Windows Defender Firewall (Control Panel) Windows Firewall with Advanced Security PowerShell commands
47What is Windows Defender?
Windows Defender (Microsoft Defender Antivirus ) is Microsoft’s built-in antivirus and threat protection software. It helps detect and remove viruses, spyware, and malware in Windows systems.
48What is the Event Viewer used for?
The Event Viewer shows logs about system events like: Errors Security issues Warnings Admins use it to troubleshoot problems and track system activity.
49What is WSUS and why is it used?
WSUS is used to download and manage Microsoft updates within a network. Instead of every PC downloading updates from the internet, they get updates from the WSUS server , saving bandwidth.
50How do you promote a server to Domain Controller?
Server Manager → Add Roles and Features → install AD DS role → click “Promote this server to a domain controller” → select domain/forest option → set DSRM password → finish & restart.
TAKE THE NEXT STEPReady to Take Your Networking Career to the Next Level?Get hands-on training in Hardware & Networking with SYSTECH and prepare for real-world IT roles.
View Course Details
51How to take a backup of Active Directory?
Use Windows Server Backup to back up the System State, which includes Active Directory.
52How do you troubleshoot DNS issues?
Use nslookup to test name resolution Use ipconfig /flushdns to clear cache Check DNS Server IP settings Restart the DNS client service Ensure the DNS server is reachable
53How do you reset a forgotten Administrator password?
Boot from Windows installation media → Repair your computer → Command Prompt → replace Utilman.exe with cmd.exe → restart → click Ease of Access icon on login screen → opens Command Prompt as SYSTEM → run net user administrator newpassword → login with new password. Use third-party tools if no access is available
54How do you check if a domain controller is working properly?
dcdiag → Checks the domain controller health repadmin /replsummary → Checks replication Event Viewer → Look for AD-related errors Check network and DNS connectivity
55What steps do you take if a server is running slow?
Open Task Manager – check CPU/RAM usage Check disk space Use Resource Monitor for details Look in Event Viewer for errors Run malware scan Disable unneeded services Restart the server if needed
56How do you handle a failed Active Directory replication?
Use repadmin /replsummary to find the issue Check DNS settings and network Restart NTDS and DNS services Use dcdiag to check errors Perform non-authoritative restore if needed
57What is Bandwidth?
Maximum amount of data that can be transmitted over a network connection in a given time . Measured in bps, Kbps, Mbps, or Gbps.
58What is Load Balancer?
A Load Balancer distributes incoming network traffic across multiple servers/devices to balance the load and improve performance.
59What is point-to-point link?
Point-to-Point link based systems are dedicated connections established between two networking systems.
60What is Routing?
Routing is the process by which a router selects the best path to forward data packets from one network to another

Intermediate Questions & Answers
Questions 61 - 120 | 60 questions

61What are the main types of networks?
LAN (Local Area Network) MAN (Metropolitan Area Network) WAN (Wide Area Network)
62What is a Protocol?
Set of rules to transfer data
63What is Redundancy?
Communication pathway that has additional links to connect for all devices in case one link goes down.
64What is PoE (Power over Ethernet)?
PoE is a standard that allows Ethernet cables to transmit data and power supply simultaneously using a single network cable.
65What is collision domain?
A collision domain is a group of devices sharing one cable or medium, where two devices sending at the same time cause a collision. Hub: all devices are in one collision domain. Switch: each port is its own collision domain.
66What happens when data arrives at a hub?
A hub works at the Physical Layer (Layer 1) of the OSI model. When data arrives, it repeats the signal out of all other ports, except the incoming port. A hub does not maintain a MAC address table.
67What is unicast , multicast and broadcast ?
Unicast - One device to one device. Multicast - One device to group of devices Broadcast - One device to all devices
68What is Broadcast domain?
A broadcast domain is a group of devices where a broadcast message from one device reaches all other devices in that group.
69Which layer hub work?
Physical layer.
70What is the purpose of http protocol?
HTTP is a method used to transfer or convey information on the world wide web.Its original purpose was to provide a way to publish and retrieve HTML pages To communicate between web browser & web servers.
71Why was DNS invented?
DNS was invented to allow users to access websites using domain names instead of remembering numerical IP addresses.
72What is ping?
Ping is a network utility that sends ICMP Echo Request packets to a host and checks the ICMP Echo Reply to test reachability and measure round-trip time. (“Packet Internet Groper” is a popular backronym, not the actual origin of the name.)
73What is difference between TCP and UDP protocols?
TCP is reliable protocol and UDP is unreliable protocol. In general, TCP gives reliability and acknowledgement for packets delivered, while UDP does not provide acknowledgement.
74How many layers we have in OSI model?
7 1.Physical 2.Data link 3.Network 4.Transport 5.Session 6.Presentation 7.Application
75What is the purpose of Data Link Layer?
The Data Link layer handles node-to-node delivery within the same network using MAC addressing, framing, media access control, and error detection.
76What is Subnetting?
Breaking a larger network into a bunch of smaller network to reduce network traffic.
77Mention the ranges for the private IPs?
Class A : 10.0.0.0-10.255.255.255 Class B : 172.16.0.0-172.31.255.255 Class C :192.168.0.0-192.168.255.255
78What will be the net mask for /24?
255.255.255.0
79What is VPN?
VPN stands for “Virtual Private Network” -a service that protects your internet connection and privacy online. It creates tunnel for your data, protects your online identity by hiding your IP address.
80What’s the benefit of subnetting?
Reduced network traffic. Optimized network performance
81What is the scope of class C address?
192.0.0.0 to 223.255.255.255.
82How many bits long is a MAC address?
83What is the function of an Ethernet Network Interface Card (NIC)?
Connects a computer to a network. Provides a unique MAC address. Converts data into network signals. Handles communication at the Physical and Data Link layers.
84How do you find the MAC address of a computer?
ipconfig /all getmac.
85What is the length of an IPv4 header?
20 bytes (Minimum) and 60 bytes (Maximum)
86Why was TTL (Time To Live) invented?
TTL prevents packets from circulating endlessly in the network. Each router decreases the TTL value by 1 when forwarding a packet. When TTL reaches 0, the packet is dropped.
87What is the APIPA range? (Automatic Private IP Addressing)
169.254.0.0 to 169.254.255.255
88What is Subnet Mask?
A subnet mask is a 32 bit value, which shows network id portion and host id portion of ip address.
89What is the size of IPv4 and IPv6?
IPv4 -32 bits. IPv6 -128 bits.
90What are the different types of IPv6 addresses?
Unique local (FD00::/8) Link local (FE80::/10) Global unicast (2000::/3) Unspecified (::) Loopback (::1/128) Multicast (FF00::/8) Anycast (taken from the global unicast range)
91What is the prefix of an IPv6 link-local address?
FE80::/10
92What is the Loopback IP Address in IPv4 & IPv6 used for local testing purposes?
127.0.0.1 (IPv4) ::1 (IPv6)
93How many ways to access the router?
Console. Aux. Telnet. SSH (Secure Shell) HTTP/HTTPS (Web GUI)
94What is a Terminal Server?
A Terminal Server allows administrators to remotely access multiple network devices. It connects to devices through their console ports. Provides centralized management of routers and switches.
95How to Reset router IOS Password?
Reload the router, press Ctrl+Break within 60 seconds to enter ROMMON mode, run confreg 0x2142 → reset, then copy startup-config running-config, set new password with enable secret <password>, run config-register 0x2102, and save with copy running-config startup-config.
96What are VTP modes?
Server. Transparent. Client.
97What is the command to see only connected routes in a router’s routing table?
Show ip route connected
98What are the different types of memory on a Cisco device?
RAM, ROM, Flash and NVRAM.
99Where is the startup config file stored on a Cisco device?
NVRAM. (Non Volatile RAM)
100What is the command to view the contents of the flash memory?
Show flash.
101How do you check the IOS version running on a Cisco device?
Show version.
102What does “C” code mean in a routing table?
Directly connected networks.
103What is the main difference between switch and router?
Switch used to connect multiple devices and networks to expand the LAN. Router used to connect different networks. Switch sends Frames and Router sends Packets.
104What is an inter-LAN connection?
An inter-LAN connection allows communication between two different LAN networks using a Router or Layer 3 switch.
105What happens when data arrives at a switch?
The switch learns the source MAC address. It checks the destination MAC address in the MAC address table. If found → frame is forwarded to the specific port. If not found → the frame is flooded to all ports except the incoming port.
106Can we assign IP address for VLAN?
Yes, using an SVI (Switch Virtual Interface).
107Difference between Layer 2 and Layer 3 switches
Layer 2 Switch → Uses MAC address for switching. Layer 3 Switch → Performs switching and routing using IP address.
108Can we communicate between two vlans?
Yes, through inter-VLAN routing using a Layer 3 device: a router (router-on-a-stick) or a Layer 3 switch (SVI).
109What is the purpose to create separate Vlan?
To separate single broadcast domain into many different broadcast domain.
110What is VTP?
VTP helps to create vlan on one switch and it is synchronized with other switches in the network
111What do you mean by STP ?
Spanning tree protocol is used to avoid loops in switching environment. By this mechanism we block port to avoid loop in switches.
112What are the status of port we have in STP?
Blocking. Listening. Learning. Forwarding.
113How is the Root Bridge elected in STP?
STP elects the Root Bridge based on the Bridge Priority and MAC address. The switch with the lowest priority value wins the election. If multiple switches have the same priority, the switch with the lowest MAC address becomes the Root Bridge.
114What is designated and root port?
Root Port: The port that gives the shortest path from a switch to the Root Bridge. Designated Port: The port that forwards data and sends BPDU messages on a network segment.
115What is VLAN?
VLAN stands for Virtual Local Area Network. VLAN is a broadcast domain that is isolated in a computer network.
116What is the default priority value for the switch in Spanning tree protocol?
The default priority value for the switch is 32768.
117What is the native VLAN ID by default on a CISCO switch?
VLAN 1.
118What are the different trunking protocols?
Different trunking protocols are ISL and 802.1Q.
119Why is trunking required?
Trunking allows multiple VLAN traffic to pass through a single physical link between switches or between a switch and a router.
120How many types of switch port modes are there ?
Access Trunk Dynamic Auto Dynamic Desirable

Advanced Questions & Answers
Questions 121- 183 | 63 questions

121Explain about switch stacking.
Switch stacking is a technology where multiple physical switches are connected together using special stacking cables. All switches operate as one single logical switch. It simplifies management, scalability, and redundancy.
122What is the Aging timer of the MAC address table?
300 seconds.
123Mention the metric of Eigrp protocol?
Bandwidth. Load. Delay. Reliability. MTU (Maximum Transmission Unit). By default, only Bandwidth and Delay are used in the actual metric calculation.
124What is the backend process of EIGRP?
EIGRP forms neighbor relationships using hello packets. It maintains Neighbor table, Topology table, and Routing table. It uses the DUAL algorithm to find the best loop-free path. Sends partial and triggered updates instead of full updates. Provides fast convergence and efficient routing.
125Mention the clock rate?
Clock rate sets how many bits can be sent over a given time (bits per second) on a serial link. It can only be configured on the DCE end.
126What are the port/protocol numbers of RIP, EIGRP, OSPF, and BGP?
RIP - 520 (UDP) EIGRP - 88 (Protocol number) OSPF - 89. (Protocol number) BGP - 179 (TCP)
127What is the backend process of RIP?
RIP routers exchange routing updates every 30 seconds. RIP uses Hop Count as its metric. The router selects the path with the lowest hop count. Maximum hop count allowed is 15. 16 hops means the network is unreachable.
128Expand BGP?
Border Gateway Protocol.
129What is AD of EIGRP?
Internal AD = 90. External AD = 170
130What is the EIGRP metric formula?
Formula: Metric = 256 × {[K1×BW + (K2×BW)/(256 − Load) + K3×Delay] × [K5/(K4 + Reliability)]}
131Explain the EIGRP neighbor conditions.
Routers must have the same Autonomous System (AS) number. Routers must have the same K-values. Routers must be in the same subnet. EIGRP must be enabled on the interface. The interface must not be configured as passive. If authentication is configured, it must match on both routers.
132What is multicast ip for OSPF
224.0.0.5 and 224.0.0.6
133What is AD value of Static, RIP, IGRP, EIGRP AND OSPF?
1-STATIC 120-RIP 100-IGRP 90-EIGRP INTERNAL 170-EIGRP EXTERNAL 110- OSPF
134What is Autonomous System?
An autonomous system is collection of networks under single administrative domain.
135What are the types of Routes available?
Static Route ,Dynamic Route, Default Route.
136What are the ways to choose DR in OSPF?
Highest Priority. Highest Router ID.
137Explain the OSPF database.
The OSPF database contains: Neighbor Table – stores neighbor router information. Link-State Database (LSDB) – contains all network topology information. Routing Table – stores the best routes. Routers exchange LSAs (Link-State Advertisements) to build the LSDB. The SPF algorithm calculates the best paths.
138What is an Access Control List (ACL)?
ACL is a set of rules configured on a router/switch to permit or deny traffic based on source/destination IP, port or protocol, applied on an interface for security and traffic filtering.
139What is a DHCP relay agent? Why do we use DHCP relay on a router?
A DHCP Relay Agent is a feature configured on a router. It forwards DHCP broadcast requests from clients to a DHCP server located in another subnet. It is required when the DHCP server is located in a different network.
140What does ARP stand for?
Address Resolution Protocol.
141What is NetBIOS?
NetBIOS (Network Basic Input/Output System) is a Windows networking protocol used for: Name resolution Session management File and printer sharing in local network.
142What are the types of NAT?
Static NAT, Dynamic NAT and PAT.
143What is PAT (Port Address Translation)?
PAT is a type of NAT. Multiple private IP addresses share a single public IP address. Different port numbers are used to identify each connection.
144What is the difference between Standard ACL and Extended ACL?
Standard ACL filters traffic based only on source IP (numbered 1–99 and 1300-1999 (expanded)), while Extended ACL filters based on source IP, destination IP, protocol, and port (numbered 100–199 and 2000-2699 (expanded)).
145Which command displays the running configuration stored in RAM?
show running-config
146What is CEF?
Cisco Express Forwarding.
147Which protocol is used in redundancy?
The protocols used in Redundancy are HSRP, VRRP and GLBP.
148What is active and standby in HSRP?
Active: The Router that owns the virtual IP and MAC address is active. Standby: It is the backup for active router.
149What is ISP Failover?
ISP Failover automatically switches internet traffic from the primary ISP to a backup ISP. It ensures continuous internet connectivity when the primary connection fails.
150What is Telnet?
Network protocol used to virtually access computers, servers, routers. Port number 23.
151What is the difference between RDP and Telnet?
RDP Used mainly in Windows operating systems. Provides graphical desktop access. Uses port 3389. Traffic is encrypted by default, but it is secure only when properly configured. Enable Network Level Authentication (NLA), use strong passwords, and avoid exposing RDP directly to the internet. Telnet Used for remote command-line access to devices like routers and switches. Uses port 23. Communication is not encrypted (not secure).
152How to configure telnet password in router?
router>enable router#configure terminal router(config)#Line VTY 0 4 router(config-line)#login router(config-line)#password ****
153What is AAA?
Authentication, Authorization and Accounting. AAA server is network server used for access control. Authentication - Identify user. Authorization - Implement Policies & permissions Accounting - Keeps track of time and data (logs and audit).
154Expand the terms PAP and CHAP.
PAP stands for Password Authentication Protocol. CHAP stands for Challenge Handshake Authentication Protocol.
155What does the show ip protocols display?
It displays details of the active routing protocols on the router, such as advertised networks, neighbors, timers, and administrative distance.
156Expand HDLC?
High-level data link control.
157What are types of password used in CISCO routers?
Five types of password Console Password. Enable Password. Enable Secret Password. Auxiliary. VTY Password. ( Virtual Tele Type) (Telnet)
158What is a gateway?
A gateway IP refers to a device on a network which sends local network traffic to other networks.
159Which type of cable is used to connect 2 computers together to transfer data?
Crossover cable.
160What are the types of Ethernet cables?
Straight-through Crossover. (Rollover cable is used for console/management access, not for Ethernet data transmission.)
161What is Auto-MDIX?
Auto-MDIX (Automatic Medium Dependent Interface Crossover) is a feature in network devices. It automatically detects whether a straight-through or crossover cable is connected. It adjusts TX and RX pairs automatically for proper communication.
162What are the port number used for FTP, TELNET and SMTP?
21-FTP 23-TELNET 25-SMTP
163What is Port Security in switches?
Port Security restricts the number/identity of MAC addresses allowed on a switch port to block unauthorized devices from connecting to the network.
164What is the CISCO proprietary protocol for link aggregation?
PAgP .
165What is the standard protocol for link aggregation?
LACP.
166Expand the term EUI.
Extended Unique Identifier.
167What is 100 BASEFX?
A 100BASE-FX is a Fast Ethernet standard that runs at 100 Mbps over multimode fiber optic cable, supporting up to 2 km in full-duplex.
168What is the difference between public and private IP?
Public IP is used across the internet, while private IP is used within the local LAN. Public IP is provided by ISP , Private IP is assigned by admin
169How do you access the CLI on a Palo Alto firewall?
Using a Console cable directly connected to the firewall. Using SSH (Port 22) from a remote system.
170Why is HTTPS inspection used in Palo Alto firewall?
HTTPS inspection decrypts SSL/TLS encrypted traffic. It allows the firewall to inspect hidden threats inside encrypted traffic. Helps detect and block: Malware Malicious websites Hidden threats
171What is Remote VPN in Palo Alto firewall?
Remote VPN allows remote users to securely connect to the internal network through the internet. Commonly used for work-from-home employees and administrators. Usually implemented using GlobalProtect VPN.
172What is IPsec in Palo Alto firewall?
IPsec (Internet Protocol Security) is used to create a secure encrypted tunnel between two networks. Commonly used for site-to-site VPN connections.
173Explain about the FortiGate firewall.
FortiGate is a Next-Generation Firewall (NGFW) developed by Fortinet. It provides network security features such as: Traffic control Intrusion prevention (IPS) VPN support Web filtering Malware protection Protection from cyber threats
174How do you configure port forwarding in a FortiGate firewall?
Create a Virtual IP (VIP). Map the public IP and port to the internal server IP and port. Create a firewall policy to allow the traffic.
175What are the necessary conditions to properly form a network
and assign IP addresses? Devices must have unique IP addresses. The correct subnet mask must be configured. Devices should be in the same network range. A default gateway must be configured for external communication.
176How can you remotely access one PC from another PC?
Using Remote Desktop Protocol (RDP). Using SSH for secure remote access. Using Telnet for basic remote connection. Using remote desktop software depending on the operating system.
177What is a PoE Injector?
A PoE (Power over Ethernet) injector is a device that adds electrical power to an Ethernet cable. It allows network devices to receive both data and power through a single Ethernet cable.
178What is a Private VLAN (PVLAN)?
Private VLAN divides a regular VLAN into sub-VLANs (Primary, Isolated, Community) to restrict Layer 2 communication between ports even within the same VLAN, commonly used for security in shared hosting environments.
179What happens in the backend when you configure a default gateway on a PC?
The PC checks whether the destination IP is in the same network or a different network. If the destination is in another network, the PC sends the packet to the default gateway. The PC uses ARP to find the MAC address of the gateway. After obtaining the MAC address, the packet is forwarded to the router for further routing.
180What is a port number in networking?
A port number is a logical communication endpoint used by TCP or UDP to identify a specific service or application running on a device. Port Number Range: 0 – 1023 → Well-known ports 1024 – 49151 → Registered ports 49152 – 65535 → Dynamic / Private ports
181What is SSH?
SSH (Secure Shell) is a secure network protocol used for remote command-line access. It provides encrypted communication over Port 22.
182What is a Wildcard Mask?
A wildcard mask, used with ACLs and OSPF, defines which bits of an IP address must match (0) and which can be ignored (1).
183When does a Layer 3 switch work as a normal switch?
A Layer 3 switch behaves like a Layer 2 switch when IP routing is disabled. It forwards frames using MAC addresses within the same VLAN. No routing between VLANs is performed. Aruvi Block, 1st Floor, St. Paul’s complex, Bharathiyar Salai, Cantonment, Trichy – 620001 Ajay building, 9th street, Cross Cut Road, Gandhipuram, Coimbatore – 641012 2nd Floor, Thilakavathy Complex, Mudichur Road, West Tambaram, Chennai - 600045 75022 02555

Practice MCQs
Test your knowledge with 10 challenging networking questions

Choose one answer for each question. Your selection will be marked immediately. If it is incorrect, the correct answer will also be shown.

1. A router receives a packet with destination 10.20.5.18. Its routing table contains 10.20.5.0/24 via R1 and 10.20.0.0/16 via R2. Which route is selected?

2. Two OSPF routers on an Ethernet segment have matching area IDs and hello/dead timers, but one interface is configured as passive. What is the likely result?

3. A switch receives a frame with an unknown destination MAC address in VLAN 20. What does it do?

4. Which statement about TCP three-way handshake is correct?

5. A DHCP client and DHCP server are on different IP subnets. Which feature allows the client broadcast request to reach the server?

6. In 802.1Q trunking, what is the purpose of the native VLAN?

7. An EtherChannel bundle is not forming with LACP. Which mismatch is most likely to prevent the member links from bundling?

8. Which OSPF packet type is used to acknowledge receipt of Link-State Advertisements?

9. A standard IPv4 ACL is applied inbound on an interface. Which traffic detail can it match?

10. A router has two equal-cost routes to the same destination learned through the same routing protocol. What can it do when equal-cost load balancing is supported?

Answered: 0/10 · Correct: 0/10

Explore Hardware & Networking Training

Build practical networking skills with SYSTECH training programs. Contact our team for course details and batch information.

Quick Enquiry →

Quick Navigation

Google Learner Rating

4.9/5★★★★★

40,000+ learners

Interview Q&A PDF

Our Branches

Trichy

129 Aruvi Block, St.Paul’s Complex, Bharathiar Salai, Cantonment, Tiruchirappalli, Tamil Nadu 620001

Coimbatore

3rd floor, Ajay building, 204, 9th St, Gandhipuram, Coimbatore,
Tamil Nadu 641012

Chennai

607/2A,2nd Floor, Thilakavathy Complex, Mudichur Road Krishna Nagar,
West Tambaram, Chennai,
Tamil Nadu 600045.

About Systech Group

Systech Group is a practical IT and cybersecurity training institute with 23+ years of experience in career-focused technical education. It provides hands-on training in networking, ethical hacking, cloud computing, software development, and emerging technologies through real-time lab environments. With 40,000+ students trained and branches in Trichy, Coimbatore, and Chennai, Systech Group focuses on building industry-ready professionals.

Data Science Quick Enquiry Form

Fill the Form Get Free Consultation From Industry Experts!

Quick Enquiry Form

Fill the Form Get Free Consultation From Industry Experts!

Ethical Hacking Course Quick Enquiry Form

Fill the Form Get Free Consultation From Industry Experts!

CCNA Quick Enquiry Form

Fill the Form Get Free Consultation From Industry Experts!

Quick Enquiry Form

Fill the Form Get Free Consultation From Industry Experts!